|
2014年论文列表
-
Numerical modeling of
microstructure evolution during laser additive manufacturing of a nickel-based
superalloy, Pulin Nie, O.A. Ojo* , Zhuguo Li, Acta Materialia, 77 (2014)
85-95.
-
Investigation of
single-layer and multilayer coatings for aluminum bipolar plate in polymer
electrolyte membrane fuel cell, Zhuguo Li, Kai Feng* , Zhiyuan Wang, Xun Cai,
Chengwu Yao, Yixiong Wu, International Journal of Hydrogen Energy, 39 (2014)
8421-8430.
-
Analysis of energy flow in
gas metal arc welding processes through self-consistent three-dimensional
process simulation, Fenggui Lu*, Hui-Ping Wang, Anthony B. Murphy, Blair E.
Carlson, International Journal of Heat and Mass Transfer, 68 (2014)
215-223.
-
Corrosion resistance and
electrical properties of carbon/chromium -titanium-nitride multilayer coatings
on stainless steel, K. Feng, Z. Li* , F. Lu, J. Huang, X. Cai, Y. Wu, Journal of
Power Sources, 249 (2014) 299-305.
-
Study on fatigue property
and microstructure characteristics of welded nuclear power rotor with heavy
section, Peng Liu, Fenggui Lu* , Xia Liu, Huijun Ji, Yulai Gao, Journal of
Alloys and Compounds, 584 (2014) 430-437.
-
Effects of shielding gas
composition on arc profile and molten pool dynamics in gas metal arc welding of
steels, Lulu Wang, Fenggui Lu, Hui-Ping Wang, Anthony Murphy, Xinghua Tang* ,
Journal of Physics D: Applied Physics, 47 (2014) 5202.
-
Investigation of molten
pool oscillation during GMAW-P process based on a 3D model, Lulu Wang, Fenggui
Lu, Haichao Cui, Xinghua Tang, Journal of Physics D: Applied Physics, 47 (2014)
5204.
-
Effect of the remelting
scanning speed on the amorphous forming ability of Ni-based alloy using laser
cladding plus a laser remelting process, Ruifeng Li, Yajuan Jin, Zhuguo Li* ,
Yanyan Zhu, Mingfang Wu, Surface and Coatings Technology, 259 (2014)
725-731.
-
Effects of rod carbide
size, content, loading and sliding distance on the friction and wear behaviors
of (Cr,Fe)7C3-reinforced α-Fe based composite coating produced via PTA welding
process, Youlu Yuan, Zhuguo Li* , Surface and Coatings Technology, 248 (2014)
9-22.
-
Investigation of C/Al–Cr–N
multilayer coatings for stainless steel bipolar plate in polymer electrolyte
membrane fuel cells, Zhiyuan Wang, Yibo Wang, Zhuguo Li* , Kai Feng* , Jian
Huang, Fenggui Lu, Chengwu Yao, Xun Cai, Yixiong Wu, Surface and Coatings
Technology, 258 (2014) 1068-1074.
-
Modeling analysis of laser
cladding of a nickel-based superalloy, Pulin Nie, O.A. Ojo* , Zhuguo Li, Surface
and Coatings Technology, 258 (2014) 1048-1059.
-
Investigation on molten
pool oscillation during GMAW-P process based on a 3-D model, Lulu Wang, Fenggui
Lu*, Haichao Cui, Xinhua Tang, Journal of Physics D: Applied Physics, 47 (2014)
465204.
-
A modified Fowler-Milne
method for monochromatic image analysis in multi-element arc plasma welding,
Xiao Xiao, Xueming Hua* , Fang Li, Yixiong Wu, Journal of Materials
Processing Technology, 214 (2014) 2770-2776.
-
Influence of alloy
elements on microstructure and mechanical property of aluminum-steel lap joint
made by gas metal arc welding, Yongchao Su, Xueming Hua* , Yixiong Wu, Journal
of Materials Processing Technology, 214 (2014) 750-755.
-
Porosity formation
mechanism and its prevention in laser lap welding for T-joints, Wei Meng, Zhuguo
Li* , Fenggui Lu, Yixiong Wu, Jianhong Chen, Seiji Katayama, Journal of
Materials Processing Technology, 214 (2014) 1658-1664.
-
Quantitative
characterization of porosity in Fe–Al dissimilar materialslap joint made by gas
metal arc welding with different current modes, Yongchao Su, Xueming Hua,
Yixiong Wu, Journal of Materials Processing Technology, 214 (2014)
81-86.
-
Dramatic enhancement of
impact toughness for weld metals of dissimilar 10%Cr rotor by high temperature
PWHT, Fenggui Lu* , Peng Liu, Huijun Ji, Yuming Ding, Xiaojin Xu, Yulai Gao,
Materials Characterization, 92 (2014) 149-158.
-
Experimental and numerical
analysis of solidification cracking behavior in fiber laser welding of 6013
aluminum alloy, Xiaojie Wang, Fenggui Lu* , Hui-Ping Wang, Haichao Cui, Xinhua
Tang, Science and Technology of Welding and Joining, 20 (2014)
58-61.
-
Numerical analysis of Al
vapour effects in gas metal arc welding of Al alloys, Science and Technology of
Welding and Joining, Lulu Wang, Hui-Ping Wang, Fenggui Lu*, Anthony B. Murphy,
Blair E. Carlson, 19 (2014) 361-368.
-
Microstructure evolution
of Fe-based nanostructured bainite coating by laser cladding, Yanbing Guo,
Zhuguo Li* , Chengwu Yao, Ke Zhang, Fenggui Lu, Kai Feng, Jian Huang, Min Wang,
Yixiong Wu, Materials & Design, 63 (2014) 100-108.
-
Role of butter layer in
low-cycle fatigue behavior of modified 9Cr and CrMoV dissimilar rotor welded
joint, Qingjun Wu, Fenggui Lu, Haichao Cui, Xia Liu, Peng Wang, Xinhua Tang,
Materials & Design, 59 (2014) 165-175.
-
Effect of natural
attapulgite powders as lubrication additive on the friction and wear performance
of a steel tribo-pair, Feng Nan, Yi Xu, Binshi Xu, Fei Gao, Yixiong Wu, Xinhua
Tang, Applied Surface Science, 307 (2014) 86-91.
-
Microstructure
characteristics and temperature-dependent high cycle fatigue behavior of
advanced 9%Cr/CrMoV dissimilar welded join, Qingjun Wu, Fenggui Lu* , Haichao
Cui, Yuming Ding, Xia liu, Yulai Gao, Materials Science & Engineering: A,
615 (2014) 98-106.
-
Analysis of solidification
cracking susceptibility in side-by-side dual-beam laser welding of aluminum
alloys, Xiaojie Wang, Hui-Ping Wang, Fenggui Lu* , Blair E. Carlson, Yixiong Wu,
International Journal of Advanced Manufacturing Technology, 73 (2014)
73-85.
-
Effect of external
constraint on the characteristics and behavior of plasma plume during high power
CO2 laser welding, Dawei Sun, Yan Cai* , Yue Wu, Yunjie Zhu, Yixiong Wu,
International Journal of Advanced Manufacturing Technology, 2014,
s00170-014-5923-3.
-
Experimental study on deep
penetrated laser welding under local subatmospheric pressure, Yan Luo, Xinhua
Tang, Fenggui Lu, International Journal of Advanced Manufacturing Technology, 73
(2014) 699-706.
-
Numerical modeling on the
formation process of keyhole-induced porosity for laser welding steel with
T-joint, Xibin Li, Fenggui Lu* , Haichao Cui, Xinhua Tang, Yixiong Wu,
International Journal of Advanced Manufacturing Technology, 72 (2014)
241-254.
-
Research on narrow-gap
GMAW with swing arc system in horizontal position, Haichao Cui, Chaodong Jiang*,
Xinhua Tang, Fenggui Lu, International Journal of Advanced Manufacturing
Technology, 74 (2014) 297-305.
-
Behavior of the plasma
characteristic and droplet transfer in CO2 laser-GMAW-P hybrid welding, Wang
Zhang, Xueming Hua, Wei Liao, Fang Li, Min Wang, International Journal of
Advanced Manufacturing Technology, 72 (2014) 935-942.
-
Applying statistical
models optimize the process of multi-pass narrow-gap laser welding with filler
wire, Hao Shi, Ke Zhang* , Zhengyi Xu, Tianyu Huang, Liwen Fan, Weining Bao,
International Journal of Advanced Manufacturing Technology, 75 (2014)
279-291.
-
The effect of the welding direction on
the plasma and mental transfer behavior of CO2 Laser + GMAW-P hybrid welding
processes, Wang Zhang, Xueming Hua* , Wei Liao, Fang Li, Min Wang,Optics and Lasers in Engineering, 58 (2014)
102-108.
-
Effect of He-Ar ratio of
side assisting gas on plasma 3D formation during CO2 laser welding, Dawei Sun,
Cai Yan* , Yonggui Wang, Yue Wu, Yixiong Wu, Optics and Lasers in Engineering,
56 (2014) 41-49.
-
Study of metal transfer in
CO2 laser+GMAW-P hybrid welding using argon–helium mixtures, Wang
Zhang, Xueming Hua* , Wei Liao, Fang Li, Min Wang, Optics & Laser
Technology, 56 (2014) 158-166.
-
Migration behavior of
solidification nuclei in pure Al melt under effect of electric current pulse,
Xi-bin LI, Feng-gui LU, Hai-chao CUI, Xin-hua TANG, Transactions of Nonferrous
Metals Society of China, 24 (2014) 192-198.
-
Microstructure and
Mechanical Properties of Friction Stir-Welded Mg-2Nd-0.3Zn-0.4Zr Magnesium
Alloy, Yong Zhao, Qingzhao Wang, Xudan He, Jian Huang*, Keng Yan, Jie Dong,
Journal of Materials Engineering and Performance, 23 (2014) 4136-4142.
-
镍基Inconel-718合金TIG焊部分熔化区组织变化,叶
欣,
华学明*,王
敏,楼松年,金属学报,50 (2014)
1003-1010.
-
Structure detail characterization of the residual austenite in
9Cr1MoNbV rotor steel weld by color metallography technique, Xia Liu, Huijun Ji,
Peng Liu, Fenggui Lu* , Yulai
Gao, International Journal of Minerals, Metallurgy and Materials, 21 (2014)
563-568.
-
基于光谱诊断的热源间距对激光-脉冲GMAW焊等离子体物理特性影响研究,廖巍,华学明,张旺,李芳,王敏,光谱学与光谱分析,34
(2014) 2601-2604.
-
Characteristics of plasma plume and effect mechanism of lateral
restraint during high power CO2 laser welding process, Yue
Wu, Yan Cai* , Dawei Sun, Junjie Zhu, Yixiong Wu, Optics & Laser Technology,
64 (2014) 72-81.
-
5052-O铝合金电阻点焊裂纹产生机理及抑制,吴松,王敏,孔谅,高柏恩,孙游,焊接学报,35
(2014) 92-96.
-
CO2激光焊接等离子体图像的三维重建,王永贵,孙大为,蔡艳,朱俊杰,吴毅雄,上海交通大学学报,48
(2014) 600-604.
-
Design
and Optimization of Magnetic Wheel for Wall Climbing Robot, 徐正一,张轲*
, Advances in Intelligent Systems and Computing, 会议
-
Evaluation model for
arc fluctuations of triple-electrode high speed fillet welding, Xiaoli Ma,
Xueming Hua* , Wu Yixiong, China Welding, 23 (2014) 17-21.
-
Multi-pass Route Planning for Thick Steel Plate Using Laser Welding
with Filler Wire, 黄天予,范力文,鲍祎宁,施浩,张轲,
Advances in Intelligent Systems and Computing, 会议
-
钢/铝异种金属激光填丝熔钎焊对接接头组织与性能分析,
高伟,阎启,黄坚*,
中国激光, 41
(2014) 0603006-1~6.
-
基于改进的Zernike矩亚像素边缘提取算法外螺纹非接触测量,
蔡艳,叶连详,孙大为,田华,朱俊杰,胡志云,
上海交通大学学报, 48
(2014) 1468-1472.
-
基于信度评价的焊缝结构光自适应多次曝光法,
孙大为,蔡艳,朱俊杰,吴毅雄,
焊接学报, 35
(2014) 57-62.
-
局部负压激光焊缝成形特点及其影响因素,
罗燕,
唐新华,
芦凤桂,
陈钦涛,
崔海超,
中国激光, 41
(2014) 0603008-1-6.
-
热处理对凹凸棒石摩擦学性能的影响,
南峰,
许一,
高飞,
徐滨士,
吴毅摊,
唐新华 ,
材料热处理学报, 35
(2014) 1-5.
-
热活化对凹凸棒石润滑材料减摩修复性能的影响,
南峰,
许一,
高飞,
徐滨士,
吴毅雄,
唐新华,
功能材料, 45
(2014) 11018-11022.
-
17-4PH不锈钢表面激光熔覆Stellite6合金涂层高周疲劳行为研究,
赵文雨, 芦凤桂, 李铸国* , 王东, 王晓娟, 刘霞, 杨仁杰, 中国激光, 41 (2014) 1-6.
-
铝板的CO2激光焊接等离子体二维温度分布的测量,
王永贵,
孙大为,
蔡艳*
, 朱俊杰,
热加工工艺, 43
(2014) 198-204.
-
钢铝异种金属对接接头激光填丝熔钎焊工艺研究,
高伟,
阎启,黄坚,
吴毅雄,
热加工工艺, 43
(2014) 53-57.
-
焊接参数对高强钢与铝合金点焊接头性能的影响,
吴松、孔谅、王敏,
焊接, 4
(2014) 51-54.
-
热成形钢与低碳钢板凸焊工艺及接头质量评价,
焦海伦,王敏,高柏恩,陆昕婷,
热加工工艺, 43
(2014) 186-189.
-
激光与电子束熔覆(Cr,Fe)7C3复合层组织及耐磨性对比,
陆斌锋,
唐普洪,
芦凤桂,
唐新华,
中国表面工程, 27
(2014) 76-81.
-
窄间隙横焊焊缝成形不对称性研究,
蒋朝东,
唐新华,
芦凤桂,
崔海超,
焊接, 2
(2014) 32-36.
-
尾吹保护对激光熔覆Stellite 6合金涂层组织和力学性能的影响,
王东, 李铸国, 王晓娟, 杨仁杰, 乔尚飞, 刘霞,
中国表面工程, 27
(2014) 52-56.
-
A14铝合金光纤激光填丝焊接热裂纹敏感性研究,
王伟,赵耀邦,胡佩佩,黄坚*,
第十九次全国焊接学术会议,2014年9月18-20日,天津,
2014.9.18.
|