实验室简介

  • 上海交通大学焊接与激光制造研究所,是我国最早建立焊接专业的研究所之一,是国家首批授予博士点、硕士点、博士后流动站单位;其前身是成立于1959年的上海交通大学焊接教研室,2002年该教研室改名为上海交通大学焊接工程研究所,2009年通过学科梯队调整并成立上海交通大学焊接与激光制造研究所。上海交通大学焊接与激光制造研究所是集教育、理论研究、焊接与激光制造技术研究与...

    查看详情

  • 2012年论文列表
    2012
    1. Effect of heat input on the microstructure of in-situ synthesized TiN-TiB/Ti based composite coating by laser cladding, Min Li, Jian Huang*, Yanyan Zhu, Surface and Coating Technology, 25 (2012) 4012-4026.

    2. Amorphous structure evolution of high power diode laser cladded Fe–Co–B–Si–Nb coatings, Yanyan Zhu, Zhuguo Li*, Jian Huang, Min Li, Ruifeng Li , Yixiong Wu, Applied Surface Science, 261 (2012) 896-901.

    3. Dilution effect on the formation of amorphous phase in the laser cladded Ni-Fe-B-Si-Nb coatings after laser remelting process, Ruifeng Li, Zhuguo Li*, Jian Huang, Yanyan Zhu, Applied Surface Science, 258 (2012) 7956-7961.

    4. Effects of heat treatments on laser welded Mg-rare earth alloy NZ30K, Jun Dai, Jian Huang*, Min Li, Zhuguo Li, Jie Dong, Yixiong Wu, Materials Science & Engineering A, 529 (2011) 401-405.

    5. Dual Ti and C ion-implanted stainless steel bipolar plates in polymer electrolyte membrane fuel cells, Kai Feng, Guosong Wu, Tao Hu, Zhuguo Li*, Xun Cai*, Paul K. Chu, Surface and Coating Technology, 206 (2012) 2914-2921.

    6. Ex situ and in situ evaluation of carbon ion-implanted stainless steel bipolar plates in polymer electrolyte membrane fuel cells, Kai Feng, Tao Hu, Xun Cai*, Zhuguo Li*, Paul K. Chu, Journal of Power Sources, 199 (2012) 207-213.

    7. Improved corrosion resistance of stainless steel 316L by Ti ion implantation, Kai Feng, Xun Cai*, Zhuguo Li*, Paul K. Chu, Materials Letters, 68 (2012) 450-452.

    8. 8. Edge Detection Combined Local Gray Level Difference and Competitive Fuzzy Logic,   Zhengyi Jiang, Yugui Li, Xiaoping Zhang, Jianmei Wang and Wenquan Sun, Applied Mechanics and Materials, 220 (2012) 1284-1287.

    9. The Combination of Local Fuzzy Entropy and Gray Level Difference-Based Thresholding Segmentation, Zhengyi Jiang, Yugui Li, Xiaoping Zhang, Jianmei Wang and Wenquan Sun, Applied Mechanics and Materials, 220 (2012) 1288-1291.

    10. Automatic Segmentation of Pores in Weld Images Based on Transition Region Extraction, Xianghua Liu, Zhenhua Bai, Yuanhua Shuang, Cunlong Zhou and Jian Shao, Applied Mechanics and Materials, 217 (2012) 1964-1967.

    11.  Joint performance of CO2 laser-MIG hybrid welding 5083-H116 alloy,        Z Gao, Y Li, J Huang, China Welding, 21 (2012) 70-75.

    12. High power diode laser cladding of hard Fe-based coatings, Zhuguo Li, Chenwu Yao, Yanyan Zhu, Jian Huang, Yixiong Wu, Laser and Tera-Hertz Science and Technology, LTST 2012, Wuhan, China.

    13. Multipass welding of thick section steels using autogenous CO2 laser welding and CO2 laser-MIG hybrid welding, Lianhai Hu, Jian Huang, Zhuguo Li, Yixiong Wu, China Welding, 21 (2012) 49-54.

    14. Investigations on laser welding of magnesium alloys, Jun Dai, Jian Huang, Zhuguo Li, Yixiong Wu, International Journal of Materials Research, 103 (2012) 1218-1222.

    15.  Reinforcement behavior in laser welding of A356/TiB 2p MMCs, Haichao Cui, Fenggui Lu, Xinhua Tang, Materials Transactions, 53 (2012) 1644-1647.

    16.  Microstructure and wear properties of laser processed Ni based amorphous matrix coatings, Ruifeng Li, Zhuguo Li, Surface Engineering, 28 (2012) 513-516.

    17.  Novel process to refine grain size of NiCrMoV steel, RK Chen, JF Gu, LZ Han, JS Pan, International Journal of Materials Research, 103 (2012) 1218-1222.

    18. Numerical simulation of heat treatment based on the model with expanded solution domain, J Gu, J Wang, J Pan, Materials Performance and Characterization, 1 (2012) 1-16.

    19. Microstructure evolution in a Fe 36Ni 36B 19.2Si 4.8Nb 4 bulk amorphous alloy irradiated by a CO2 laser beam, PL Zhang, ZG Li, CW Yao, ZS Yu, H Yan, Lasers in Engineering, 23 (2012) 221-230.

    20.  Particles migration behavior during laser keyhole welding of ZL101/TiB 2 composites, Haichao Cui, Fenggui Lu, Xinhua Tang, Acta Metallurgica Sinica, 25 (2012) 190-200.

    21.  Mechanical properties and microstructure analysis of refllling friction stir welding on 2219 aluminum alloy, P Li, Z Xu, C Yu, J Yao, G Chen, Acta Metallurgica Sinica, 25 (2012) 225-234.

    22.  Exfoliation and dispersion of graphene in ethanol-water mixtures, WW Liu, BY Xia, XX Wang, JN Wang, Frontiers of Materials Science, 6 (2012) 176-182.

    23. Relationship between the γ and some parameters of Fe-based bulk metallic glasses, P Zhang, H Yan, C Yao, Z Yu, P Xu, International Journal of Materials Research, 103 (2012) 336-340.

    24. Research on weldability of ZL101/TiB 2 MMCs by laser-TIG hybrid welding, Haichao Cui, Fenggui Lu, Xinhua Tang, Shun Yao, Shongnian Lou, China Welding, 21 (2012) 27-33.

    25.  Research on laser welding of Mg-rare earth alloy Mg-3Nd-0.2Zn-0.4Zr, Jun Dai, Jian Huang, Yixiong Wu, Journal of Materials Engineering and Performance, 21 (2012) 208-212.

    26.  The research of virtual design and parts library system oriented to high voltage switchgear, T Dong, M Wang, Journal of Materials Engineering and Performance, 403 (2012) 2663-2666.

     


    1. 热处理数值模拟进展之一—扩展求解域热处理数值模拟, 潘健生, 王婧, 顾剑锋, 金属热处理, 37 (2012) 7-13.

    2. 热处理模拟软件Thermal Prophet 的开发与应用, 刘晓晖, 韩利战, 顾剑锋, 潘健生, 金属热处理, 37 (2012) 115-118.

    3. 低压转子钢30Cr2Ni4MoV 珠光体等温转变动力学, 陈睿恺, 顾剑锋, 潘健生, 金属热处理, 37 (2012) 1-5.

    4. 基于改进最小二乘法的焊缝特征直线提取方法, 秦涛, 张轲, 邓景煜, 金鑫, 焊接学报, 33 (2012) 33-36.

    5. 不同焊接模式下DP590GA GMAW 接头气孔敏感性研究, 刘文敏, 芦凤桂, 唐新华, 张帆, 热加工工艺, 41 (2012) 145-147.

    6. 低合金高强钢激光穿透焊接头性能研究, 郭晓军, 李铸国, 孟威, 许超, 热加工工艺, 41 (2012) 151-153.

    7. 10Ni3CrMoV CO2 激光多层焊的接头组织与性能, 臧昊, 胡连海, 黄坚, 电焊机, 42 (2012) 32-36.

    8. 傅里叶变换法计算焊接电弧光谱Stark展宽研究, 潘成刚, 华学明, 张旺, 李芳, 肖笑, 光谱学与光谱分析, 32 (2012) 1739-1743.

    9. 淬火-碳分配-回火钢的低温组织和性能, 周澍, 张柯, 顾剑锋, 戎咏华, 材料热处理学报, 33 (2012) 30-33.

    10. 激光功率对激光熔覆Fe-Co-B-Si-Nb涂层组织和性能的影响, 达则晓丽, 朱彦彦, 李铸国, 中国表面工程, 25 (2012) 52-56.

    11. 基于Boltzmann光谱法的焊接电弧温度场测量计算, 斯红, 华学明, 张旺, 李芳, 肖笑, 光谱学与光谱分析, 32 (2012) 2311-2313.

    12. 基于标准温度法的脉冲TIG焊电弧温度场计算与分析, 潘成刚, 肖笑, 华学明, 吴毅雄, 李芳, 光谱学与光谱分析, 32 (2012) 2327-2330.

    13. 热丝TIG焊热丝准稳态温度场的解析模型, 赵福海, 华学明, 叶欣, 吴毅雄, 上海交通大学学报, 46 (2012) 1063-1068.

    14. 超高强度热成形钢电阻点焊的数值模拟, 郑文, 王敏, 孔谅, 孙游, 雷鸣, 上海交通大学学报, 46 (2012) 1074-1078.

    15. 铝合金变极性TIG焊熔池与阴极清理区视觉检测系统, 余富贵, 华学明, 肖笑, 李芳, 上海交通大学学报, 46 (2012) 1084-1087.

    16. 铝合金AC-P-MIG焊接电弧行为及熔滴过渡过程, 袁磊, 华学明, 张旺, 李芳, 吴毅雄, 上海交通大学学报, 46 (2012) 1092-1102.

    17. 超高强热成形钢B1500HS的电阻点焊工艺和接头性能, 杨柳, 程轩挺, 孙游, 吴嘉元, 王敏, 刘宇上海交通大学学报, 46 (2012) 1103-1106.

    18. 基于Stark展宽的TIG焊接电弧三维电子密度测量研究, 张旺, 华学明, 潘成刚, 李芳, 王敏, 光谱学与光谱分析, 32 (2012) 2601-2604.

    19. 脉冲熔化极气体保护焊电源故障诊断设计, 李芳, 华学明, 吴毅雄, 焊接学报, 33 (2012) 101-104.

    20. 考虑热损失的热丝TIG焊热丝温度分布解析模型, 赵福海, 华学明, 叶欣, 吴毅雄, 焊接学报, 33 (2012) 97-100.

    21. 6mm厚铝合金板激光搭接焊T型接头焊缝的成形性能, 许超, 李铸国, 孟威, 郭晓军, 机械工程材料, 36 (2012) 72-75.

    22. 冷却速率对激光熔覆K4169高温合金涂层组织的影响, 刘洪刚, 李铸国, 黄坚, 聂璞林, 张尧成,吴毅雄, 机械工程材料, 36 (2012) 21-24.

     

    版权所有:2014年 上海交通大学激光制造与材料改性重点实验室    (沪交ICP备05180    邮编:200240    电话:021-000000

    地址:上海市闵行区东川路800号    技术支持:上海屹超信息技术有限公司