实验室简介

  • 上海交通大学焊接与激光制造研究所,是我国最早建立焊接专业的研究所之一,是国家首批授予博士点、硕士点、博士后流动站单位;其前身是成立于1959年的上海交通大学焊接教研室,2002年该教研室改名为上海交通大学焊接工程研究所,2009年通过学科梯队调整并成立上海交通大学焊接与激光制造研究所。上海交通大学焊接与激光制造研究所是集教育、理论研究、焊接与激光制造技术研究与...

    查看详情

  • 2016年论文列表
    2016年度
    1. Microstructure correlation and fatigue crack growth behavior in dissimilar 9Cr/CrMoV welded joint, Xionglin Deng, Fenggui Lu*, Haichao Cui, Xinhua Tang, Zhuguo Li, Materials Science and Engineering: A, 651 (2016) 1018-1030.

    2. Self-passivating carbon film as bipolar plate protective coating in polymer electrolyte membrane fuel cell, Zhiyuan Wang, Kai Feng* , Zhuguo Li*, Fenggui Lu, Jian Huang, Yixiong Wu, Paul K. Chu, International Journal of Hydrogen Energy, 41 (2016) 5783-5792.

    3. Numerical simulation of resistance spot welding of Al to zinc-coated steel with improved representation of contact interactions, Zixuan Wan, Hui-Ping Wang*, Min Wang*, Blair E. Carlson, David R. Sigler, International Journal of Heat and Mass Transfer, 101 (2016) 749-763.

    4. Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles, Yuan Chen, Fenggui Lu, Ke Zhang, Pulin Nie, Seyed Reza Elmi Hosseini, Kai Feng*, Zhuguo Li*, Paul K. Chu, Materials & Design, 105 (2016) 133-141.

    5. Microstructure and mechanical properties of sputter deposited Ni/Ni3Al multilayer films at elevated temperature, Chao Zhang, Kai Feng*, Zhuguo Li*, Fenggui Lu, Jian Huang, Yixiong Wu, Applied Surface Science, 378 (2016) 408-417.

    6. Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing, J.J. Lin*, Y.H. Lv, Y.X. Liu, B.S. Xu, Z. Sun, Z.G. Li, Y.X. Wu, Materials & Design, 102 (2016) 30-40.

    7. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling, Yuan Chen, Fenggui Lu, Ke Zhang, Pulin Nie, Seyed Reza Elmi Hosseini, Kai Feng* , Zhuguo Li* , Journal of Alloys and Compounds, 670 (2016) 312-321.

    8. Gelatin-enhanced porous titanium loaded with gentamicin sulphate and in vitro release behavior, Qiuyan Li, Guo He* , Materials and Design, 99 (2016) 459-466.

    9. Tungsten Carbide Grain Size Computation for WC-Co Dissimilar Welds, Dongran Zhou, Haichao Cui, Peiquan Xu* , Fenggui Lu, Journal of Materials Engineering and Performance, 25 (2016) 2500-2510.

    10. 原位自生WC增强Fe基涂层的组织及干滑动摩擦磨损性能,袁有录;李铸国,材料工程,44 (2016) 47-53.

    11. Failure transition mechanism in creep rupture of modified casting 9Cr-1.5Mo-1Co welded joint, Yuanhang Wei, Shangfei Qiao, Fenggui Lu* , Wen Liu, Materials & Design, 97 (2016) 268-278.

    12. γ Grain Memory in X12CrMoWVNbN10-1-1 Steel, Tao, X., Han, L., Gu, J.*, Steel Research International, 87 (2016) 571-580.

    13. Influence of absorbed nitrogen on microstructure and corrosion resistance of 2205 duplex stainless steel joint processed by fiber laser welding, Rui Lai, Yan Cai*, Yue Wu, Fang Li, Xueming Hua, Journal of Materials Processing Technology, 231 (2016) 397-405.

    14. Analysis of melt ejection during long pulsed laser drilling, Ting-Zhong Zhang, Zhi-Chao Jia, Hai-Chao Cui, De-Hua Zhu, Xiao-Wu Ni, Jian Lu, Chinese Physics B, 25 (2016) 054206.

    15. Micro-scale model based study of solidification cracking formation mechanism in Al fiber laser welds, Xiaojie Wang, Fenggui Lu*, Hui-Ping Wang*, Zhaoxia Qu, Liqian Xia, Journal of Materials Processing Technology, 231 (2016) 18-26.

    16. Investigation of multi-coating process treated magnesium alloy as bipolar plate in polymer electrolyte membrane fuel cell, Kai Feng, Xingwu Guo, Zhuguo Li* , Chengwu Yao, Yixiong Wu, International Journal of Hydrogen Energy, 41 (2016) 6020-6028.

    17. Atomistic simulations of the nanoindentation-induced incipient plasticity in Ni3Al crystal, Kai Xiong, Haiming Lu, Jianfeng Gu*, Computational Materials Science, 115 (2016) 214-226.

    18. Hook formation and mechanical properties of friction spot welding in alloy 6061-T6, J.Y. Cao, M. Wang*, L. Kong, L.J. Guo, Journal of Materials Processing Technology, 230 (2016) 254-262.

    19. Study of the laser absorption characteristics of CO2 laser-pulsed GMAW hybrid welding based on spectral diagnosis technique, W. Zhang, F. Li, M. Li, X. Hua, Y. Cai, Spectroscopy and Spectral Analysis, 36 (2016) 913-918.

    20. 10CrSiNiCu 船用高强钢光纤激光焊接接头组织和性能,魏菁;王欢;石少坚;黄坚*;施可扬,中国激光,43 (2016) 0303003.

    21. Dynamic coupling between molten pool and metallic vapor ejection for fiber laser welding under subatmospheric pressure, Yan Luo, Xinhua Tang* , Shengjie Deng, Fenggui Lu, Qintao Chen, Haichao Cui, Journal of Materials Processing Technology, 229 (2016) 431-438.

    22. Study on the influence of side assisting gas on energy loss during CO2 laser welding based on 3D reconstruction, Dawei Sun, Yan Cai* , Fang Li, Xueming Hua, International Journal of Advanced Manufacturing Technology, In press.

    23. Investigation on the effects of parameters on hot cracking and tensile shear strength of overlap joint in laser welding dissimilar Al alloys, Yulong Zhang, Fenggui Lu* , Haichao Cui, Yan Cai, Songtao Guo, Xinhua Tang, International Journal of Advanced Manufacturing Technology, In press.

    24. The microstructure evolution and element segregation of Inconel 617 alloy tungsten inert gas welded joint, Wen Liu, Fenggui Lu* , Xinhua Tang, Renjie Yang, Haichao Cui, Journal of Materials Research, In press.

    25. Segregation of niobium in laser cladding Inconel 718 superalloy, Yi-tong LONG, Pu-lin NIE* , Zhu-guo LI, Jian HUANG, Xiang LI, Xin-mei XU, Transactions of Nonferrous Metals Society of China, 26 (2016) 431-436.

    26. Role of stress in the high cycle fatigue behavior of advanced 9Cr/CrMoV dissimilarly welded joint, Chendong Shao, Fenggui Lu* , Zhuguo Li* , Yan Cai, Peng Wang, Yuming Ding, Journal of Materials Research, In press.

    27. Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718, Yuan Chen, Ke Zhang, Jian Huang, Seyed Reza Elmi Hosseini, Zhuguo Li* , Materials & Design, 90 (2016) 586-594.

    28. Growth morphology and solidification behavior of in-situ synthesized TiN and TiB, Min Li, Jian Huang* , Yan-yan Zhu, Zhu-guo Li, Yi-xiong Wu, Materials Transactions, 57 (2016) 15-19.

    29. Effect of bevel angle on microstructure and mechanical property of Al/steel butt joint using laser welding-brazing method, Junhao Sun, Qi Yan, Zhuguo Li, Jian Huang* , Materials & Design, 90 (2016) 468-477.

    30. Laser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 718, Yuan Chen, Fenggui Lu, Ke Zhang, Pulin Nie, Seyed Reza Elmi Hosseini, Kai Feng, Zhuguo Li, Carbon, In press.

    31. Special zone in multi-layer and multi-pass welded metal and its role in the creep behavior of 9Cr-1Mo welded joint.    L iu W, Lu F*, Wei Y, Ding Y, Wang P, Tang X    Materials & Design.


     

    版权所有:2014年 上海交通大学激光制造与材料改性重点实验室    (沪交ICP备05180    邮编:200240    电话:021-000000

    地址:上海市闵行区东川路800号    技术支持:上海屹超信息技术有限公司