|
|
Direct-soldering 6061 aluminum alloys with ultrasonic coating, Min Ding*, Peilei Zhang, Zhenyu Zhang, Shun Yao, Ultrasonics Sonochemistry, 17(2010): 292-297. The constitutive relation of an axisymmetric detached coating on a rigid substrate, Pulin Nie, Zhuguo Li*, Jian Huang, International Journal of Mechanial Sciences, 52-12(2010): 1709-1715. Strengthening behavior analysis of weld metal of laser hybrid welding for microalloyed steel Jiaming Ni, Zhuguo Li*, Jian Huang, Materials & Design, 31(10): 4876-4880. Carbon coated stainless steel bipolar plates in polymer electrolyte membrane fuel cells, Kai Feng, Xun Cai*, Hailin Sun, Diamond and Related Materials, 19-11(2010): 1354-1361. Nitrogen plasma-implanted titanium as bipolar plates in polymer electrolyte membrane fuel cells, Kai Feng, Dixon T. K. Kwok*, Dongan Liu, Journal of Power Sources, 195-19(2010): 6798-6804. Corrosion behavior and electrical conductivity of niobium implanted 316L stainless steel used as bipolar plates in polymer electrolyte membrane fuel cells, Kai Feng, Zhuguo Li*, Xun Cai, Surface & Coatings Technology, 205-1(2010): 85-91. Structure and optical Properties of High-rate low-temperature grown TiO2 thin films by reactive reactive magnetron sputtering, Zhuguo Li, Shoji Miyake*, Acta Metallurgica Sinica, 46-1(2010): 13-18. Microstructure and Mechanical Properties of High Power CO2 Laser Welded Joint of Mg-Rare Earth Alloy NZ30K, Jun Dai, Jian Huang*, Zhuguo Li, Physics Procedia, 5(2010): 511-516. 会议 Laser welding and laser cladding of high performance materials, Jian Huang*, Zhuguo Li, Haichao Cui, Physics Procedia, 5(2010): 1-8. 会议 Amorphization of Fe-Ni based alloys by laser cladding and remelting, Peilei Zhang, Zhuguo Li*, Chenwu Yao, Advanced Materials Research, 97-101(2010): 1420-1424. 会议 Study on the softening in overlapping zone by laser-overlapping scanning surface hardening for carbon and alloyed steel, Chengwu Yao*, Binshi Xu, Jian Huang, Peilei Zhang, Yixiong Wu, Optics and Lasers in Engineering, 48-1 (2010): 20-26. Microstructures in a resistance spot welded high strength dual phase steel, Xinsheng Liao, Xiaodong Wang, Zhenghong Guo, Min Wang*, Yixiong Wu, Yonghua Rong, Materials Characterization, 61-3 (2010): 341-346. Temperature and structural dependence of electrochemical activity and fuel cell performance, Junjie Niu*, Jiannong Wang, Acta Materialia, 58-2(2010): 408-414. Preparation of hollow carbon nanocages by iodine-assisted heat treatment, Shangjun Teng, Xiaoxia Wang, Baoyu Xia, Jiannong Wang*, Journal of Power Sources, 195-4(2010): 1065-1070. Preparation of dispersible double-walled carbon nanotubes and application as catalyst support in fuel cells, Ziping Wu, Baoyu Xia, Xiaoxia Wang, Jiannong Wang*, Journal of Power Sources, 195-8(2010): 2143-2148. Ni-Cr Co-implanted 316L stainless steel as bipolar plate in polymer electrolyte membrane fuel cells, Kai Feng*, Yao Shen, Dongan Liu, Paul K. Chu, Xun Cai, International Journal of Hydrogen Energy, 35-2(2010): 690-700. In situ transmission electron microscopy investigations of the kinetics of α″-Fe16N2 precipitation during the ageing of nitrogen–ferrite, X.C. Xiong*, A. Redjaïmiab, M. Gouné, Scripta Materialia, 63-12(2010): 1232-1235. Transmission electron microscopy investigation of acicular ferrite precipitation in γ′-Fe4N nitride, X.C. Xiong*, A. Redjaïmiab, M. Gouné, Materials Characterization, 61-11(2010):1245-1251. Lattice dynamical finite-element method, Xiaohui Liu, Jianfeng Gu*, Yao Shen, Ju Li, Changfeng Chen, Acta Materialia, 58-2(2010): 510-523. A general strategy for the preparation of hollow carbon nanocages by NH4Cl-assisted low-temperature heat treatment, S. J. Teng, J. N. Wang, B. Y. Xia, X. X. Wang*, Chemistry-A European Journal, 16-46(2010): 13603-13608. Durability improvement of a Pt catalyst with the use of a graphitic carbon support, B. Y. Xia, J. N. Wang, S. J. Teng, X. X. Wang*, 16-28(2010): 8268-8274. Organic-inorganic composite nanocoatings with superhydrophobicity, good transparency, and thermal stability, Q. F. Xu, J. N. Wang*, K. D. Sanderson, 4-4(2010): 2201-2209. Erosion properties of Fe based amorphous/nanocrystalline coatings prepared by wire arc spraying process, X. B. Liang, J. B. Cheng*, J. Y. Bai, B. S. Xu, Surface Engineering, 26-3(2010): 209-215. Synthesis, characterization and growth mechanism of nano-scale hydroxyl magnesium silicate, F. Gao, Y. Xu, B. Xu, B. Zhang*, Advanced Materials Research, 92(2010): 263-270. Diameters of single-walled carbon nanotubes (SWCNTs) and related nanochemistry and nanobiology, J. Ma, J. N. Wang, C. J. Tsai, R. Nussinov, B. Ma*, Signal, Image and Video Processing, 4-1(2010): 17-28. 激光熔WC颗粒增强Ni基合金涂层的组织与性能, 戎磊,黄坚*,李铸国,中国表面工程, 23-6 (2010): 40-44, 50. 铁基合金激光熔覆层裂纹控制的组织设计, 姚成武,徐滨士*,黄坚,中国表面工程, 23- 3(2010): 74-79, 83. 船用E级钢厚板CO2激光多层焊接工艺与组织, 杨东杰,胡连海,黄坚*,热加工工艺, 39-19(2010): 152-155. 药芯焊丝CO2焊工艺评价及远程监测系统研究,朱俊杰,蔡艳*,吴毅雄,热加工工艺, 9-23(2010): 153-155, 158. 船用钢板T型接头CO2激光电弧复合焊工艺与组织分析, 肖炯,黄坚*,胡连海,热加工工艺 , 39-19(2010): 159-162. 电子束原位合成Fe-Cr-C合金组织及力学性能,吴晓敏，芦凤桂，陆斌峰，俞海良, 《上海交通大学学报》, 44-4(2010): 463-467.不等厚ULC-BH钢激光拼焊接头硬化机制,倪加明,李铸国*, 蔡艳,焊接学报卷, 31-8(2010): 17-20. 原位生成铝基复合材料的激光焊接,崔海超,芦凤桂,唐新华*,焊接学报, 31-8(2010): 68-72. 三电极高速CO2双边角焊质量及稳定性分析,马晓丽,华学明*,林航, 焊接学报, 31-7(2010): 105-108. 铝合金高功率激光M IG复合焊热源形态特征,高志国,李亚玲,付俊, 焊接学报, 31-5(2010):109-112. DSP+MCU数字控制脉冲GMAW铝合金焊机研究华学明, 李芳, 陆志强,吴毅雄,焊接学报, 10(2010): 10-13. 5％Ni船舶用钢及其焊接性,丁敏,唐新华,张培磊,芦凤桂,梅峻玺, 焊接学报，12(2010): 53-55. HastelloyC-4焊接接头耐晶间腐蚀能研究倪加明，李铸国，黄坚，吴毅雄 ，材料工程，2010(1): 82-84.反应磁控溅射法高速低温沉积锐钛矿相TiO2薄膜的结构与光学性能,李铸国,三宅正司,金属学报, 1 (2010):13-18.中厚板的高功率激光焊接,黄坚，李铸国，唐新华,航空制造技术,2(2010):26-29.超超临界转子钢X12CrMoWVNbN10-1-1的等温转变动力学,韩利战，顾剑锋，潘健生,材料热处理学报, 31-1(2010): 35-39.母材成分对DP590钢电阻点焊接头性能的影响，王敏，吴毅雄，潘华，雷鸣焊接学报, 31-2(2010):33-35. 三丝GMAW焊接过程电弧中断现象分析，华学明,王飞，马晓丽，吴毅雄,上海交通大学学报, 44-4(2010):442-446.CO2气体保护药芯焊丝双丝焊接电信号稳定性分析,王飞，华学明，马晓丽，吴毅雄,上海交通大学学报, 4(2010):457-462. 鼓泡法试验薄膜力学行为的研究,张宁，聂璞林，李铸国，黄坚，陈秋龙,力学季刊，31-1 (2010):15-20.大厚度10Ni5CrMoV钢小坡口旋转电弧GMAW焊接工艺研究，梅崯玺,郭登成，丁敏，芦凤桂，唐新华, 热加工工艺, 39-9(2010): 156-158逆变电阻焊的工业应用及研究进展，甘文军,王敏，孔谅, 電焊機, 40-5 (2010): 101-105.不同厚度汽车用高强钢板激光焊接临界速度的研究高俊，黄坚，阎启，胡连海, 热加工工艺, 39-11(2010): 133-135.B170P1差厚高强钢激光焊接工艺与力学性能分析, 陈炜，陈康敏，薛雷，俞海良，蔡艳,焊接学报 , 31-6(2010): 1-4.激光焊接工艺参数对稀土镁合金焊缝成形的影响，戴军,黄坚，吴毅雄, 轻合金加工技术, 31-7(2010): 53-56.图像技术在焊接熔池特征参数提取中的研究进展及发展趋势，李梦醒,吴毅雄，蔡艳，孙大为, 热加工工艺, 39-21(2010): 142-145.原位生成铝基复合材料的激光焊接, 崔海超，芦凤桂，唐新华，姚舜, 焊接学报, 31-8(2010): 68-72.Fe41Co7Cr15Mo14C15B6Y2合金涂层的激光制备及显微组织研究，张培磊，李铸国，姚成武，上海工程技术大学学报, 24-4(2010): 359-362.
79
|