|
代表性论文、论著
|
[1] C.
Shen, K.D. Liss, Z. Pan, Z. Wang, X.
Li, H. Li, Thermal cycling of Fe3Al based iron aluminide during the wire-arc
additive manufacturing process: An in-situ neutron diffraction study.
Intermetallics, 92 (2018) 101-107.
[2] C.
Shen, Z. Pan, D. Cuiuri, S. van Duin,
D. Luo, B. Dong, H. Li, Influences of postproduction heat treatment on Fe3Al
based iron aluminide fabricated using the wire-arc additive manufacturing
process. The International Journal of Advanced Manufacturing Technology, 97 (2018)
335-344.
[3] C.
Shen, Z. Pan, Y. Ma, D. Cuiuri, H. Li,
Fabrication of iron-rich Fe-Al intermetallics using the wire-arc additive
manufacturing process. Additive Manufacturing, 7 (2015) 20-26.
[4] C.
Shen, Z. Pan, D. Cuiuri, D. Ding, H.
Li, Influences of deposition current and interpass temperature to the
Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing
process. The International Journal of Advanced Manufacturing Technology, 88
(2017) 2009-2018.
[5] C.
Shen, Z. Pan, D. Cuiuri, J. Roberts,
H. Li, Fabrication of Fe-FeAl functionally graded material using the wire-arc
additive manufacturing process. Metallurgical and Materials Transactions B,
47 (2016) 763-772.
[6] C.
Shen, Z. Pan, D. Cuiuri, B. Dong, H.
Li, In-depth study of the mechanical properties for Fe3Al based iron
aluminide fabricated using the wire-arc additive manufacturing process.
Materials Science & Engineering A, 669 (2016) 118-126.
[7] C.
Shen, Z. Pan, D. Ding, L. Yuan, N.
Nie, Y. Wang, D. Luo, D. Cuiuri, S. van Duin, H. Li, The influence of
post-production heat treatment on the multi-directional properties of
nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing
process, Additive Manufacturing, 22 (2018) 411-421.
[8] B. Dong, Z.
Pan, C. Shen, Y. Ma, H. Li,
Fabrication of copper-rich Cu-Al alloy using the wire-arc additive
manufacturing process. Metallurgical and Materials Transactions B, 48 (2017)
3143-3151.
[9] Y. Ma, D.
Cuiuri, C. Shen, H. Li, Z. Pan,
Effect of interpass temperature on in-situ alloying and additive
manufacturing of titanium aluminides using gas tungsten arc welding. Additive
Manufacturing, 8 (2015) 71-77.
[10] Y. Ma, D.
Cuiuri, H. Li, Z. Pan, C. Shen,
The effect of postproduction heat treatment on g-TiAl
alloys produced by the GTAW-based additive manufacturing process. Materials
Science & Engineering A, 657 (2016) 86-95.
[11] D. Ding, C. Shen, Z. Pan, D. Cuiuri, H. Li, N.
Larkin, S. van Duin, Towards an automated robotic arc-welding-based additive
manufacturing system from CAD to finished part. Computer-Aided Design, 73
(2016) 66-75.
[12] A.M.
Paradowska, N. Larkin, H. Li, Z. Pan, C.
Shen, M. Law, Neutron diffraction residual stress measurements of welds
made with pulsed tandem gas metal arc welding (PT-GMAW). Powder Diffraction,
29 (2014) S24-S27.
[13] D. Ding, Z.
Pan, S. van Duin, H. Li, C. Shen,
Fabricating superior NiAl Bronze components through wire-arc additive
manufacturing. Materials, 9 (2016) 652.
[14] J. Wang, Z.
Pan, Y. Ma, Y. Lu, C. Shen, D.
Cuiuri, H. Li, Characterization of wire arc additively manufactured titanium
aluminide functionally graded material: Microstructure, mechanical properties
and oxidation behavior. Materials Science & Engineering A, 734 (2018)
110-119.
|