|
|
2015年
Effect of chemical segregation on nanobainitic transformation in laser cladded coatings, Yanbing Guo, Zhuguo Li*, Seyed Reza Elmi Hosseinia, Min Wang, Materials and Design, 88 (2015) 781-789. Investigation on microstructure and properties of dissimilar joint between SA553 and SUS304 made by laser welding with filler wire, Yue Wu, Yan Cai*, Huan Wang, Shaojian shi, Xueming Hua, Yixiong Wu, Materials and Design, 87 (2015) 567-578. Effects of isothermal heat treatment on nanostructured bainite morphology and microstructures in laser cladded coatings, Yanbing Guo, Kai Feng, Fenggui Lu, Ke Zhang, Zhuguo Li*, Seyed Reza Elmi Hosseini, Min Wang, Applied Surface Science, 357 (2015) 309-316. Microstructure evolution in the weld metal region of a Ni-based Inconel 718 superalloy produced by tungsten inert gas welding, X. Ye, Xueming Hua, Yue Wu, Songnian Lou, China Welding (English Edition), 24 (2015) 36-44. Creep behavior and microstructure evaluation of welded joint in dissimilar modified 9Cr-1Mo steels, Wen Liu, Fenggui Lu*, Xinhua Tang, Haichao Cui, Renjie Yang, Yulai Gao, Materials Science and Engineering: A, 644 (2015) 337-346. Liquation cracking in fiber laser welded joints of inconel 617, Wenjie Ren, Fenggui Lu, Renjie Yang, Xia Liu, Zhuguo Li*, Journal of Materials Processing Technology, 226 (2015) 214-220. Formation and influence mechanism of keyhole-induced porosity in deep-penetration laser welding based on 3D transient modeling, Fenggui Lu*, Xibin Li, Zhuguo Li, Xinhua Tang, Haichao Cui, International Journal of Heat and Mass Transfer, 90 (2015) 1143-1152. Controlling hot cracking in Ni-based Inconel-718 superalloy cast sheets during tungsten inert gas welding, Xin Ye, Xueming Hua*, Min Wang, Songnian Lou, Journal of Materials Processing Technology, 222 (2015) 381-390. Modelling the crack propagation behavior in 9Cr/CrMoV welds, Qian Guo, Fenggui Lu*, Haichao Cui, Renjie Yang, Xia Liu, Xinhua Tang, Journal of Materials Processing Technology, 226 (2015) 125-133. Analysis of Al-steel resistance spot welding process by developing a fully coupled multi-physics simulation model, Jin Wang, Hui-Ping Wang*, Fenggui Lu*, Blair E. Carlson, David R. Sigler, International Journal of Heat and Mass Transfer, 89 (2015) 1061-1072. A comparative study on fiber laser and CO2 laser welding of Inconel 617, Wenjie Ren, Fenggui Lu, Renjie Yang, Xia Liu, Zhuguo Li* , Seyed Reza Elmi Hosseini, Materials & Design, 76 (2015) 207-214. Gleeble simulation of the HAZ in Inconel 617 welding, Wen Liu, Fenggui Lu*, Renjie Yang, Xinhua Tang, Haichao Cui, Journal of Materials Processing Technology, 225 (2015) 221-228. Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy, Yong Zhao, Xiaolu Huang, Qiming Li, Jian Huang*, Keng Yan, International Journal of Advanced Manufacturing Technology, 78 (2015) 1437-1443. Correlation of microstructure and fracture toughness of advanced 9Cr/CrMoV dissimilarly welded joint, Qian Guo, Fenggui Lu*, Xia Liu, Renjie Yang, Haichao Cui, Yulai Gao*, Materials Science and Engineering: A, 638 (2015) 240-250. Microstructure and properties of high-power laser welding of SUS304 to SA553 for cryogenic applications, Yue Wu, Yan Cai* , Dawei Sun, Junjie Zhu, Yixiong Wu, Journal of Materials Processing Technology, 225 (2015) 56-66. Splitting phenomenon in martensitic transformation of X12CrMoWVNbN10-1-1 steel, Xingang Tao, Lizhan Han, Jianfeng Gu*, International Journal of Materials Research, 106 (2015) 565-571. Characterization of carbon ion implantation induced graded microstructure and phase transformation in stainless steel, Kai Feng, Yibo Wang, Zhuguo Li*, Paul K. Chu*, Materials Characterization, 106 (2015) 11-19. Investigation on effects of process parameters on porosity in dissimilar Al alloy lap fillet welds, Wen Liu, Hui-Ping Wang, Fenggui Lu*, Haichao Cui, Xinhua Tang, International Journal of Advanced Manufacturing Technology, 81 (2015) 843-849. A comparative study on microstructure and properties of Inconel 52M overlays deposited by laser beam and GTA cladding, Gang Li, Maolong Zhang, Jian Huang*, Zhiyuan Sun, Yixiong Wu, International Journal of Advanced Manufacturing Technology, 81 (2015) 103-112. Effect of interstitial solutes on precipitation behavior of 9–12% chromium ferritic steels, Xingang Tao, Chuanwei Li, Lizhan Han, Jianfeng Gu*, Metals and Materials International, 21 (2015) 440-445. Investigation on the effects of shielding gas on porosity in fiber laser welding of T-joint steels, Kai Li, Fenggui Lu*, Haichao Cui, Xibin Li, Xinhua Tang, Zhuguo Li, International Journal of Advanced Manufacturing Technology, 77 (2015) 1881-1888. Multi-pass route planning for thick steel plate using laser welding with filler wire, Tian-Yu Huang, Li-Wen Fan, Yi-Ning Bao, Hao Shi, Ke Zhang*, Advances in Intelligent Systems and Computing, 363 (2015) 551-560. 基于熔池图像的熔化极气体保护焊焊接过程质量监测方法, 盛洁； 朱俊杰； 蔡艳*； 孙大为； 洪蓝青, 上海交通大学学报, 49 (2015) 1477-1481. ZM5镁合金薄壁铸件光纤激光补焊工艺与组织性能研究，陈宏，李铸国*，姚成武，吴毅雄，中国激光，42 (2015) 203002-1. Gd元素对激光熔覆镁合金涂层组织和性能的影响，陈宏，李铸国*，姚成武，吴毅雄，中国激光，42 (2015) 206002-1. 双丝共熔池熔化极气体保护焊熔池流动的数值模拟，吴东升；华学明*；叶定剑；张菁；顾煜；上海交通大学学报, 49 (2015) 1435-1440. Microstructure and mechanical properties of high-strength TC11 titanium alloy joints welded by laser beam, Yu, H.-J, Fan, R.-Y., Huang, J. , Pan, L.-H.,Wang, Y, Chinese Journal of Nonferrous Metals, 25 (2015) 1-8. Effect of subatmospheric pressure on plasma plume in fiber laser welding, Yan Luo, Xinhua Tang*, Fenggui Lu, Qintao Chen, Haichao Cui, Journal of Materials Processing Technology, 215 (2015) 219-224. Study on the effect of laser-induced plasma plume on penetration in fiber laser welding under subatmospheric pressure, Qintao Chen, Xinhua Tang*, Fenggui Lu, Yan Luo, Haichao Cui, International Journal of Advanced Manufacturing Technology, 78 (2015) 331-339. Discontinuous precipitation during isothermal transformation in a 9-12% chromium ferritic steel, Xingang Tao, Lizhan Han, Jianfeng Gu*, ISIJ International, 55 (2015) 2639-2647. Design and optimization of magnetic wheel for wall climbing robot, Zheng-Yi Xu, Ke Zhang*, Xiao-Peng Zhu, Hao Shi, Advances in Intelligent Systems and Computing, 363 (2015) 619-629. Spatial distribution characteristics of plasma plume on attenuation of laser radiation under subatmospheric pressure, Yan Luo, Xinhua Tang*, Fenggui Lu, Qintao Chen, Haichao Cui, Applied Optics, 54 (2015) 1090-1096. Effect of quenching rates on microstructure and impact ductile of X12CrMoWVNbN10-1-1 Steel, X.G. Tao, L.Z. Han, J. F. Gu, Materials Transactions, 56 (2015) 2063-2069. 基于熔池尾部图像特征的三明治板激光焊焊偏状态在线检测方法，杨茜；蔡艳*；孙大为；朱俊杰；吴毅雄；上海交通大学学报, 49 (2015) 1464-1470. 热成形钢与低碳钢电阻凸焊的数值模拟，万子轩； 王敏； 焦海伦； 高柏恩； 陆昕婷；上海交通大学学报, 49 (2015) 80-85. Experimental and numerical analysis of solidification cracking behaviour in fibre laser welding of 6013 aluminium alloy, X. J. Wang, F. G. Lu*, H. P. Wang, H. C. Cui, X. H. Tang, Y. X. Wu, Science and Technology of Welding and Joining, 20 (2015) 58-67. Comparison of temperature and composition measurement by spectroscopic methods for argon-helium arc plasma, Xiao Xiao, Xueming Hua*, Yixiong Wu, Optics and Laser Technology, 66 (2015) 138-145. Microstructures and corrosion properties of laser welded joint of 960 high-strength steel, Li, H., Qiao, J., Jiang, X., Chen, J., Wu, Y, Transactions of the China Welding Institution, 36 (2015) 75-78. Microstructure and mechanical properties of high power CO2 laser welded Inconel 625 nickel based alloy, Gang Li, Jian Huang, Yixion Wu, Lasers in Engineering, 32 (2015) 229-240. Porosity sensitivity of A356 Al alloy during fiber laser welding, Kai LI, Feng-gui LU*, Song-tao GUO a, Hai-chao CUI, Xin-hua TANG, Transactions of Nonferrous Metals Society of China (English Edition), 25 (2015) 2516-2523. 激光熔覆Inconel718镍基合金温度场与应力场模拟, 戴德平，蒋小华，蔡建鹏，芦凤桂，陈源，李铸国，邓德安，中国激光，42 (2015) 903005-1. Precipitates in coarse-grained heat-affected zone of Ni-based 718 superalloy produced by tungsten inert gas welding, Xin Ye, Xueming Hua*, Yixiong Wu, Songnian Lou, Journal of Materials Processing Technology, 217 (2015) 13-20. Statistical analysis of process parameters to eliminate hot cracking of fiber laser welded aluminum alloy, Jin Wang, Hui-Ping Wang, Xiaojie Wang, Haichao Cui, Fenggui Lu*, Optics & Laser Technology, 66 (2015) 15-21. Mechanical constraint intensity effects on solidification cracking during laser welding of aluminum alloys, Xiaojie Wang, Fenggui Lu*, Hui-Ping Wang, Haichao Cui, Xinhua Tang, Yixiong Wu, Journal of Materials Processing Technology, 218 (2015) 62-70. Microstructure evolution of HAZ of TIG welded Ni-based 718 superalloy, Xin Ye, Xueming Hua*, Yixiong Wu, Transactions of the China Welding Institution, 36 (2015) 97-100. Reduced hot cracking susceptibility by controlling the fusion ratio in laser welding of dissimilar Al alloys joints, Yulong Zhang, Fenggui Lu*, Hui-Ping Wang, Xiaojie Wang, Haichao Cui, Xinhua Tang, Journal of Materials Research, Journal of Materials Research 30 (2015) 993-1001. Liquid film migration in laser welded joint of Inconel 617, Wenjie Ren, Fenggui Lu, Renjie Yang, X. Liu, Zhuguo Li*, Journal of Materials Research, 30 (2015) 2340-2347. Studies of electroslag cladding Inconel 52M multilayer, G. Li, M.L. Zhang, J. Huang, Z.Y. Sun, Y.X. Wu, Surface Engineering, 31 (2015) 52-57. Microstructural characterization and wide temperature range mechanical properties of NiCrMoV steel welded joint with heavy section, Fenggui Lu*, Xia Liu, Peng Wang, Qingjun Wu, Haichao Cui, Xin Huo, Journal of Materials Research, 30 (2015) 2108-2116. Tribological behaviors and wear mechanisms of ultrafine magnesium aluminum silicate powders as lubricant additive, Feng Nan*, Yi Xu, Binshi Xu, Fei Gao, Yixiong Wu, Zhuguo Li, Tribology International, 81 (2015) 199-208. Effect of Cu Nanoparticles on the Tribological Performance of Attapulgite Base Grease, Feng Nan, Yi Xu, Binshi Xu, Fei Gao, Yixiong Wu, Zhuguo Li, Tribology Transactions, 58 (2015) 1031-1038. 50 mm转子钢超窄间隙激光填丝焊接头组织与性能，赵勇，王清曌，黄坚*，吴毅雄，中国激光，42 (2015) 0203007. Effects of Al and N plasma immersion ion implantation on surface microhardness, oxidation resistance and antibacterial characteristics of Cu, Quan-zhang AN*,Kai FENG, He-ping LÜ, Xun CAI, Tie-tun SUN, Paul K. CHU, Transactions of Nonferrous Metals Society of China, 25 (2015) 1944-1949. Corrosion behavior of carbon film coated magnesium alloy with electroless plating nickel interlayer, Yan Mao, Zhuguo Li* , Kai Feng* , Xingwu Guo, Zhifeng Zhou, Yixiong Wu, Journal of Materials Processing Technology, 219 (2015) 42-47. Preparation, characterization and wear behavior of carbon coated magnesium alloy with electroless plating nickel interlayer, Yan Mao, Zhuguo Li* , Kai Feng* , Xingwu Guo, Zhifeng Zhou, Jie Dong, Yixiong Wu, Applied Surface Science, 327 (2015) 100-106.
40
|